Race Keeper SE data logging camera setup
race keeper video
 
Features at a glance

  • Automatically delivers instantly synchronized video and data for use with Race-Keeper Comparo driver development software
     
  • Stunningly high-resolution video delivered by two full-stream MPEG encoders supporting up to four cameras (the only system of its kind on the market)
     
  • Crystal clear audio delivered via a durable microphone programmed with automatic gain control
     
  • Capture track sessions to removable SD card or USB stick
     
  • Control buttons with heavy click and button feedback or simply configure the box to be completely auto-power on and auto-start and auto-stop
     
  • High-visibility LED indicators burn your eyes even in bright sunlight
     
  • Locking connectors ensure secure and tight connections under high-vibration environments
     
  • Data inputs include OBD-II/CAN and up to 8 analog sensors
     
  • Lightweight (less than 450g) and small package

race-keeper logo

Race Keeper SE Video Data System

Race-Keeper SE Kit - £1000 (exc. VAT)
Race-Keeper SE (main box only) - £835 (exc. VAT)
Please call us to order

Race Keeper SE combines professional grade video and data logging systems in one easy-to-use video data package. The SE "Standard Edition" features a vented enclosure for maximum cooling, for use in the majority of applications where dirt and water ingress are not an issue.

It is available as a single box, or also in a kit form, including: 2 high-res cameras, microphone, GPS module, 2GB SD card, 1GB USB stick, power loom, Comparo PC software and quick start guides.

Technical Specs:

Video

  • Video format - NTSC4 composite video camera inputs NTSC or PAL
     
  • Video signal and power in single locking connector
     
  • Simultaneous dual frame recording (two MPEG encoders record two camera views full frame)
     
  • DVD quality resolution (720x480 video resolution)
     
  • MPEG 4
     
  • 30 frames per second recording (NTSC)
     
  • 2.5-4MBit/Sec video bit rate user selectable
     
  • User defined video layout - Multiple full screen, Picture-in-picture, split screen options using 1 to 4 camera views
     
  • Video out jack connector for camera setup
     

Recording media

  • SD card, removable
     
  • USB key
     
  • Internal storage
     

Max logging time

Dependent on memory device size and resolution settings (examples below)

  • Recording single stream at 5Mb/sec onto a 2GB SD card allows 1 hour recording
     
  • Recording dual stream at 8 Mb/sec on both frame onto a 16GB SD card allows 2 hours of recording
     
  • Recording single stream at 2.5 Mb/sec onto a 16GB SD card allows 12.5 hours of recording
     

Control buttons

  • Membrane switch panel with heavy click and button feedback characteristics
     
  • Power on/off
     
  • Record/stop record
     
  • Pause/unpause record
     

LED indicators

  • High-visibility LEDs
     
  • Record - Red when system is recording
     
  • Power - Green when system is on, Red when system is off but power is available, flashing red if power is bad or low
     
  • Status - Green: Good
     
  • Transfer - Yellow flashing: Video and data available to offload, Yellow solid: offload in progress
     
  • Memory used - 3 green LEDs, on yellow/red LED indicating memory almost full/full
     

Data inputs

  • Locking RJ-45 connectors
     
  • 8 multi-function analog/digital sensor inputs
     
  • Steering
     
  • Throttle
     
  • Brake
     
  • RPM
     
  • Wheel-speed
     
  • Beacon
     
  • Two additional spare sensor inputs
     

OBD-II/CAN Data

2 CAN I/O ports for ECU interface. All ECU channels available

  • Vehicle OBDII / CAN input on USB - multiple channels available
     
  • Internal accelerometer: 3-axis; ±6.0g range, 0.01g resolution
     
  • Battery voltage, box temperature recorded
     
  • PC connection USB port for setup and data transfer if not using instant offload
     

Mechanical

  • Custom flame retardant ABS enclosure
     
  • Width 7.35"/187mm, depth 4.75"/121mm, height (front) 1.4"/36mm and height (back) 2.1"/53mm
     
  • Weight 1.1 lb/0.5kg
     
  • Operating temperature: -20 to +55 C ambient
     
  • Storage temperature: -20 to +75 C
     
  • Shock: 0.25m onto hard surface, except connector face
     
  • Vibration: 6g @ 0-1KHz random pattern
     
  • Compliant with FCC part 15 Class B, and current CE standards
     

Power

  • 12v DC, 1Amp (15W max)
     
  • Locking power connector
     
  • USB integrated into power loom for peripheral connection
     

Mounting options

  • 3M dual lock Velcro (provided)
     
  • 4-hole AMPS bolt pattern in case standard mount
     

Audio

  • Two-channel input, single locking connector
     
  • Automatic Gain Control built-in
     
  • Line level or dynamic microphone inputs
     
  • 5v or 12v supply
     

GPS Antenna

  • 4Hz sample rate
     
  • GPS position accuracy: <2.5 m, horizontal
     
  • 27dB active antenna
     
  • Magnetic mount
     
  • NMEA Input/output: ASCII, 0183, 2.3 (compatible to 3.0)
     
  • Time to first fix: <1 sec
     
  • Acquisition and tracking sensitivity: -160dBm
     
  • Max velocity measurement: 515 m/s (1000 knots)
     
  • Dimensions: 50.5 mm L x 42 mm W x 13.9 mm H (1.99" x 1.65" x 0.55")
     
  • Weight: 60 g (without cable)
     
  • Power consumption: 30 mA (max)
     
  • Environment: -40 to +85 C with high humidity
     


(All prices exc. VAT)